See my comments above. Go to the Yaesu web site and download the drivers for the FT You need to download and install the Yaesu drivers. Just follow the prompts of the software during install and you will be fine. You might even hear the PC making some system beep noises as it realizes that it has been connected to an external USB device the radio.
You should see two newly added ports:. Again, your new ports might be numbered 3 and 4, or 6 and 7, or some other combination. I recommend the Triplite USB 2. Other cables do not have the ferrite or may not have the shielding that you need to have within the cable.
MANY errors that show up with software crashing or Hamlib pop up errors, or folks crashing software when on 40m or high power on 20m are due to the cheap USB cables without shielding out there. Get a quality cable and be done with it. Lack of grounding and RFI issues are quick to present themselves when using digital modes.
If your keyboard starts to lock up, or your mouse, or the software starts acting sluggish.. Once the drivers are loaded, it is a matter of getting the digital software that you want installed and setting it up to talk with the USB port on your laptop. If you do not install the driver first, NONE of this will work.
Just stop reading now. Stop reading and install the driver from the Yaesu site. Here is the link again. Once that is done, then move forward to the next step. If you have a A , your menu numbers will be slightly off, just go by the menu name.
I use and it works fine. These are the settings on the main screen of the FT that I adjusted. This will overdrive the rigs modulator which will cause unwanted audio harmonics. Not good. Turn the DT Gain setting down to about 4, and start working your way back up, watching for ALC on the meter as well as the power out that you want.
Excessive ALC indication is a sign that the audio drive is too high and distortion is most likely happening. With all the updates to the software, it is best to just get the latest release when it is available. It is believed that the phenomenon that when one plugged the headset or microphone to the front Jack, it is not working, is also why many of you are complaining that Windows 10 has no sound from audio Jack sometimes.
To help you solve sound issue effectively, here this post will introduce to you ways on the basis of every possible reason. To simplify the matter, you would better check the physical condition of the front Jack, in other words, you are advised to make sure you have plugged your microphone or headphone into the right audio plug.
It is a common sense that the green is designed for your speaker or headphone , and the pink one is for the microphone. Do not make any mistake about this plug. And if the two jacks are the same on front panel, you can recognize them with the icon. Nevertheless, you can also choose to plug your microphone or speaker to the rear panel audio jack plug to see if it can generate sound. If it can make the audio device work, you can use the rear panel socket. But if not, you can go ahead.
It is necessary for you to set the microphone or the speaker as the default device for the purpose of avoiding possible troubles. Fix sound icon missing on windows And then click OK. You have just made the speaker or the microphone as the default device, which would make the front jack work well and Windows 10 audio sound issue resolved automatically.
Unless it is really helpful for you to solve the front jack out of work issue, or you should forge ahead to further solutions. If you find the Front Jack is in good physical condition, but it has no sound from microphone or speaker on Windows 10, maybe you should change the Front Jack detect settings to get rid of the unnecessary interruption.
In common, when you insert a microphone or speaker to the audio jack, if it pops the information that a jack has been plugged in, you do not need to disable the front panel jack detection. But if there is not, you should tick it. After you have disabled the front jack detection, there will be no disturbance affecting the audio sound.
If the device is not yet connected, install the device-specific driver first. You can do this by using the appropriate installer for the device. Then, connect the device. Windows now selects the device-specific driver instead of the default USB audio 2. This method works in this situation because the problem occurs only if the device-specific driver replaces the default driver after the device is connected. Audio Devices Troubleshooting. Skip to main content. This browser is no longer supported.
Download Microsoft Edge More info. Contents Exit focus mode.
0コメント